G-55 plans needed

Post tips n' tricks, construction and detailing techniques, airbrushing techniques, decals, references and tools
Post Reply
User avatar
warhawk
Comandante di Stormo
Comandante di Stormo
Posts: 137
Joined: Sun Feb 25, 2007 6:51 am
Location: Belgrade, Serbia

G-55 plans needed

Post by warhawk » Wed Jan 23, 2008 6:04 am

Does anyone have the correct plans for Fiat G-55 Sottoserie 0? I need to check the difference of some panels between Sottoserie0 and the production version.

User avatar
Editor
Site Admin
Site Admin
Posts: 2180
Joined: Thu Jul 24, 2003 3:53 pm
Location: Canada
Contact:

Post by Editor » Wed Jan 23, 2008 9:12 am

Try getting a copy of Ali D'Italia #10.

User avatar
jrlucero
Comandante di Stormo
Comandante di Stormo
Posts: 114
Joined: Mon Nov 06, 2006 2:21 pm
Location: Guatemala

Post by jrlucero » Thu Jan 24, 2008 8:11 am

There is a great diagram on The Camouflage & Markings of the Aeronautica Nazionale Repubblicana 1944-45 by Gabriele Valentini and Ferdinando D'Amico that shows the differences between the early and late G.55s.
Just build it!

José Lucero

Working on:
1/35 Autoblnda AB.41
1/48 P-47D Brazilian Jambock Squadron Senta Pua!

User avatar
warhawk
Comandante di Stormo
Comandante di Stormo
Posts: 137
Joined: Sun Feb 25, 2007 6:51 am
Location: Belgrade, Serbia

Post by warhawk » Thu Jan 24, 2008 8:36 am

I have both books, but neither of them has plans for Sottoserie 0 wing upper surfaces (I need to know exactly how these looked like, since I'm modifying panel lines on a model). I have one more question about "Camouflage & Markings of the Aeronautica Nazionale Repubblicana 1944-45". Does that lower wing panel with those fairings (in front of the ventral air intake - page 97) overlap the surrounding panels, or is it in the same level with them?

Rick
Generale di Brigata Aerea
Generale di Brigata Aerea
Posts: 243
Joined: Mon Nov 13, 2006 10:31 am
Location: Florence, Italy

Panels on the G55 Sottoserie 0 wings

Post by Rick » Thu Jan 24, 2008 10:42 am

If you go to the site:
www.hyperscale.com
and at the voice "Features" look for Fiat G55 Prototype, in an old article of mine you will find an image showing the wings and the relevant panels of sottoserie 0, from the "Catalogo Nomenclatore" (Spare Parts catalogue, original Fiat documentation)
Unfortunately the panel in front of the ventral air intake is not represented but looking to the photo at pag 51 of Ali d'Italia (third photo, right side at 3/4 high) the panel seems to overlap.
That's all I was able to find
Riccardo
Riccardo Trotta

User avatar
jrlucero
Comandante di Stormo
Comandante di Stormo
Posts: 114
Joined: Mon Nov 06, 2006 2:21 pm
Location: Guatemala

Post by jrlucero » Thu Jan 24, 2008 2:42 pm

I've always liked that scheme Riccardo. Where there any other FIAT G.55s operative in the Regia Aeronautica painted in that way??
Just build it!

José Lucero

Working on:
1/35 Autoblnda AB.41
1/48 P-47D Brazilian Jambock Squadron Senta Pua!

Rick
Generale di Brigata Aerea
Generale di Brigata Aerea
Posts: 243
Joined: Mon Nov 13, 2006 10:31 am
Location: Florence, Italy

Operative G55

Post by Rick » Fri Jan 25, 2008 10:56 am

Hi Jose
According to my documentation only the three prototype were camouflaged in that way and one prototype was in force of 353°Squadriglia in Sardegna, so I think only this with this camouflage was operative
Riccardo
Riccardo Trotta

User avatar
warhawk
Comandante di Stormo
Comandante di Stormo
Posts: 137
Joined: Sun Feb 25, 2007 6:51 am
Location: Belgrade, Serbia

Post by warhawk » Fri Jan 25, 2008 12:40 pm

Is it possible to find the original G-55 technical manual and part list in PDF?
Also, could someone please tell me which panels should I fill on the upper surfaces?
Image

Post Reply