Cockpit photos, MC-200

Post topics relating to fighters, bombers, ground attack aircraft, transports, powerplants, ordnance, armament, materials construction, design, secret weapons, flak, radar, ground equipment (e.g., autotreno 3000)
Post Reply
User avatar
Rudow70
Pilota
Posts: 2
Joined: Tue Aug 14, 2007 12:37 pm
Location: Aiken, SC, USA

Cockpit photos, MC-200

Post by Rudow70 » Fri Aug 17, 2007 2:24 pm

Does any one have any clear pictures of the MC-200 cockpit? I'm trying my hand at the PCM MC-200, and I'm not clear about where certain items should be located. Any help would be much appreciated.

Thanks in advance,

Rudow70

Editor
Site Admin
Site Admin
Posts: 1763
Joined: Thu Jul 24, 2003 3:53 pm
Location: Calgary, AB, CANADA
Contact:

Post by Editor » Fri Aug 17, 2007 2:31 pm

This link contains two close-ups of the C.200 instrument panel:

http://www.stormomagazine.com/Reference ... Valle.html

The scan here is from AeroDetail 15 C.200/202/205:

Image
Vince Tassone

User avatar
Rudow70
Pilota
Posts: 2
Joined: Tue Aug 14, 2007 12:37 pm
Location: Aiken, SC, USA

Post by Rudow70 » Fri Aug 17, 2007 7:35 pm

Vince,

Thanks for the photos. They will help me put that 'pit together, hopefully. If you have built the PCM MC-200, do you have any hints or tips you would care to share? If so, I'm all eyes and ears. This is the first multimedia, limited run kit I've ever built, so I'm a bit nervous about my skills in getting it to go together reasonably well. After all, I'm not Alan, who's working on that Re-2005 kit in Austira. If this one looks halfway decent, I may give that one a try, since I love the looks of it. Again, thanks for your help.

Rudow70

Editor
Site Admin
Site Admin
Posts: 1763
Joined: Thu Jul 24, 2003 3:53 pm
Location: Calgary, AB, CANADA
Contact:

Post by Editor » Sat Aug 18, 2007 12:17 am

I haven't built either the 1/48 or 1/32 PCM MC.200 however the PCM 1/48 MC.200 is basically the same kit as the Special Hobby kit and both kits are fine. Jean built the 1/48 PCM kit so he's probably the guy to chat with. Here's an article of his:

http://www.stormomagazine.com/ModelArti ... 00d_1.html
Vince Tassone

Post Reply