Are kits from all manufacturers actually the same kit?
Posted: Fri Dec 12, 2008 11:30 am
The question is, is one model such as the 1/48 Macchi C.200 the same mold but a just new release from other manufacturers? I use the C.200 as an example because PCM released it and then SH released it w/o the p-e detail. (If you don't have the PCM kit, I highly recommend it.) SH also seems to release the same kits that Flying Machines has previously released. In fact, there are posts here that hope SH will release a kit soon after FM does because of cost considerations.
Italeri is a good example a re-releaser. They did it with the Accurate Miniatures Avenger and now plan to re-release a BR-20 made by some one else. Their impending release of the Re.2002 is surely some one else's. Whose?
Is there a site where these variations of the same model can be compared that is better than just a box review where the previous kit is mentioned? A good example would be the 1/48 Fiat G.50. The G.50 has been issued by SH, PCM, Italian Classics, Secter/Hasegawa, and probably others I don't know of. Are they all the same kit? How do you now if you are getting a rehash of the Secter G.50 kit with shallow wheel wells versus a kit like the SH one where they have resin inserts to make up for this lack of detail? Luckily a shop like Venture Hobbies will open the box so you can see whats inside. I can't do that when ordering on-line.
You don't have to limit this discussion on the C.200 or the G.50. Obviously the SM.79 made by Trumpeter and the SM.79 made by CA are two distinct kits. But if Italeri ever releases a SM.79 you can be assured that it is going to be one or the other manufacturers previous products.
Italeri is a good example a re-releaser. They did it with the Accurate Miniatures Avenger and now plan to re-release a BR-20 made by some one else. Their impending release of the Re.2002 is surely some one else's. Whose?
Is there a site where these variations of the same model can be compared that is better than just a box review where the previous kit is mentioned? A good example would be the 1/48 Fiat G.50. The G.50 has been issued by SH, PCM, Italian Classics, Secter/Hasegawa, and probably others I don't know of. Are they all the same kit? How do you now if you are getting a rehash of the Secter G.50 kit with shallow wheel wells versus a kit like the SH one where they have resin inserts to make up for this lack of detail? Luckily a shop like Venture Hobbies will open the box so you can see whats inside. I can't do that when ordering on-line.
You don't have to limit this discussion on the C.200 or the G.50. Obviously the SM.79 made by Trumpeter and the SM.79 made by CA are two distinct kits. But if Italeri ever releases a SM.79 you can be assured that it is going to be one or the other manufacturers previous products.