plan drawings for italian aircraft
-
- Pilota
- Posts: 4
- Joined: Mon Aug 16, 2010 10:39 pm
plan drawings for italian aircraft
I am trying to find a good source for plan drawings that show such detail as rivet placement on italian aircraft. In particular, I am interested in such drawings for such aircraft as the Macchi 200-205, Fiat G. 50 & 55, Regianne 2000-2005. Are there some monographs with these drawings that would have this detail in them?
- Mirek Riha
- Generale di Brigata Aerea
- Posts: 286
- Joined: Fri Nov 03, 2006 12:49 am
- Location: Prague, Czech Republic
-
- Comandante di Squadriglia
- Posts: 25
- Joined: Thu Jul 01, 2010 2:02 pm
hello! the factory drawings for assembly and plans for the macchi 202/205 are available. not sure that many rivets were poking out. i have started the tauro kit..... i was going to build it right out of the box but there is no way i can leave the fin and rudder in the shape they came. who knows what else. a very strange complicated kit with an attempt at super detail but then really sloppy work otherwise. the sequence of assembly will never work. use the instructions to keep track of the parts but the fuselage will not go together with the assembled interior. it needs to be loaded from the bottom into the assembled fuselage. great looking wing, but the fuselage has hugely oversize panel lines. looks like more than one person worked on the mold.one of them was not as skilled. james.
-
- Comandante di Squadriglia
- Posts: 25
- Joined: Thu Jul 01, 2010 2:02 pm