Page 1 of 3

1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Mon Mar 27, 2023 11:44 am
by s00ntir
Two days ago I started my new project - Fiat G.55 in experimental livery. Very nice kit - goes together pretty fast :-) I started with careful fitting of exhaust stacks and glueing fuselage halves together. Then I opened all those smal air intakes with a tip of my scalpel. Next I started to work on beautiful resin cocpit. I've decided to use yellow green colour for the interior.

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Mon Mar 27, 2023 11:45 am
by s00ntir
That's my plan...

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Mon Mar 27, 2023 11:52 am
by s00ntir
Today I finished cocpit interior and started my work on maze of plumbing, rods and tubes :-) Still need to add some more!

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Tue Mar 28, 2023 2:23 pm
by s00ntir
"Plumber's work" finished. By the way - coffee is cold... as usual ;-)

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Thu Mar 30, 2023 5:22 pm
by Editor
Your attention to detail is fantastic.

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Fri Mar 31, 2023 1:25 am
by s00ntir
It's Mad Riveter time again. I keep telling myself I love it..... ;-) Riveting is great! Repeat.... What a time consuming operation ....

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Fri Jun 09, 2023 8:46 am
by s00ntir
I took a while - but finally it comes to the end. Riveted, cleaned - just some final touches - and onto the airbrushing.

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sat Jun 10, 2023 1:58 am
by Vincent Fiore
Outstanding, beautiful work congratulations you are to be commended for a fantastic job.

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sat Jun 10, 2023 11:08 am
by s00ntir
Thank you - although it's not finished yet ;-) This kit requires a lot of part fitting before applying glue. But I really hate to use putty - only to correct some small scratches. In next few days I shall start making camo. Let the stress begin!

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sat Jun 10, 2023 1:55 pm
by s00ntir
il cannone ;-)

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sun Jun 11, 2023 9:47 am
by Editor
Another masterpiece incoming.

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sun Jun 11, 2023 10:51 am
by s00ntir
I feel under pressure...

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Sun Jun 11, 2023 2:44 pm
by Editor
Why do I get the feeling a person like you thrives under pressure :esmile:

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Fri Jun 23, 2023 9:35 am
by s00ntir
Some progress - at last. You know that feeling you think everything is ready for airbrushing and then - you find some small scratches, imperfections.... and next ones and then another ones.... ;-)

Re: 1/32 PCM Fiat G.55 Centauro - another Ugo Drago's plane

Posted: Fri Jun 23, 2023 12:23 pm
by s00ntir
I'm quite satisfied with riveting effect - seems to be subtle.