Fiat Br. 20, Special Hobby, 1/48 scale
- Kubrt
- Comandante di Stormo
- Posts: 92
- Joined: Thu Apr 12, 2007 12:44 am
- Location: Line near Pilsen, Czech Republic
Fiat Br. 20, Special Hobby, 1/48 scale
Hello,
after long time, here is my new topic. I have choose new Special Hobby kit Fiat Br. 20 Cicogna in 1/48 scale. Building is really difficult
...side window... I have glued clear parts with cyanoacrylate glue:
...rough sanding:
...and final result after polishing:
after long time, here is my new topic. I have choose new Special Hobby kit Fiat Br. 20 Cicogna in 1/48 scale. Building is really difficult
...side window... I have glued clear parts with cyanoacrylate glue:
...rough sanding:
...and final result after polishing:
Last edited by Kubrt on Sun Feb 14, 2010 11:14 pm, edited 2 times in total.
Jakub "Kubrt" Vilingr
My dear friend I just came trought this built and it has been a real PIMA! It has been a very long time since I had seen such a bad fit on a model. Take great care with the front turret and make sure that you can slide it inside the nose without cracking the wall behind, otherwise you are obliged to put the turret in, when you will glue your fuselage halves. Be aware also that the plots to fix the wings are more of a trouble than an help, and I strongly suggest you remove those and work on a better system. The wing butt drove me nuts. Please feel free to contact me if you feel like, I will share my experience with pleasure. Bye for now, jean.
-
- Comandante di Stormo
- Posts: 73
- Joined: Wed Jan 03, 2007 7:11 am
- Location: Massachusetts, USA
Quit your whining you big babies. I do know that at least Jean has done battle with many a POS or Pig kit. I just finished the Baltimore, now hot pins under my finger nails would be a pleasure.
At least after I put the cylinders on the crankcase the assembly fit inside the cowling. Actually fit! (I always assemble the engine first - The Baltimore cylinders had to be cut in half..literally!). On the down side, the row of mounting holes are too close together and the back row does not fit, I had to reverse the direction they faces. But who can see the back row anyway.
As for the windows, mine all fit perfectly and just let a thin little liquid cement run around the edge by capillary action.
As for who can see what, to hell with a lot of the interior. My big issue was the top turret being able to be dropped in after painting. Based on how it goes together, dropping the turret in could mean it drops in never to be taken out.
Soooooo... I took the lower floor that goes over the lower gun tub/jaw (which I will close) cut it and turned it upside down. I glued the base on the turret bottom clear part and test fitted the height. Glued my new turret base in. When it is all done, but for the turret, I'll sand around the base to make sure it is a close drop fit, paint and drop it in.
Jean, tell us more about the nose turret. Can you putr the turret base in, then after painting assemble the nose gune and slip the clear part over?
At least after I put the cylinders on the crankcase the assembly fit inside the cowling. Actually fit! (I always assemble the engine first - The Baltimore cylinders had to be cut in half..literally!). On the down side, the row of mounting holes are too close together and the back row does not fit, I had to reverse the direction they faces. But who can see the back row anyway.
As for the windows, mine all fit perfectly and just let a thin little liquid cement run around the edge by capillary action.
As for who can see what, to hell with a lot of the interior. My big issue was the top turret being able to be dropped in after painting. Based on how it goes together, dropping the turret in could mean it drops in never to be taken out.
Soooooo... I took the lower floor that goes over the lower gun tub/jaw (which I will close) cut it and turned it upside down. I glued the base on the turret bottom clear part and test fitted the height. Glued my new turret base in. When it is all done, but for the turret, I'll sand around the base to make sure it is a close drop fit, paint and drop it in.
Jean, tell us more about the nose turret. Can you putr the turret base in, then after painting assemble the nose gune and slip the clear part over?
Steven "Modeldad" Eisenman
OK Steven! here is the story of the front turret.
Firt step masking, fun all the way as the posts are hardly visible; Then the agencement of the MG is not correct and should be worked out if you want to see your MG hanging out of the turret like on the pictures.
When you close the fuselage you have to ad the front turret bulkhead and, if you follow the instructions, you must ad the turret at this time of the assembling process. As I did not proceed that way because former experiences taught me that: when a model needs a lot of sanding, usually some dust makes its way to where you do not excpect it, and when you remove your masks from the transparencies you are done! So I let the turret apart and yes I could used a coton swap to clean the insidefront floor and side glasses with future at the end of the show.
Now back to the problem I had: when I tried to put the turret in place it did not fit anymore, pushing things a little bit I heard a tremendous crack and the whole bulkhead went free! Ha ha what a great fishing party! Because once you have catch the fish, then you have to put the thing back in its former place, plus a security space for the turret. That's what I did after many painful trials. I managed to cut an ark of circle based on the turret diameter, glue it at the turret base to prevent any disgraceful gap with the fuselage. Mission done but geeee, a tricky one!
I hope this will help.
Firt step masking, fun all the way as the posts are hardly visible; Then the agencement of the MG is not correct and should be worked out if you want to see your MG hanging out of the turret like on the pictures.
When you close the fuselage you have to ad the front turret bulkhead and, if you follow the instructions, you must ad the turret at this time of the assembling process. As I did not proceed that way because former experiences taught me that: when a model needs a lot of sanding, usually some dust makes its way to where you do not excpect it, and when you remove your masks from the transparencies you are done! So I let the turret apart and yes I could used a coton swap to clean the insidefront floor and side glasses with future at the end of the show.
Now back to the problem I had: when I tried to put the turret in place it did not fit anymore, pushing things a little bit I heard a tremendous crack and the whole bulkhead went free! Ha ha what a great fishing party! Because once you have catch the fish, then you have to put the thing back in its former place, plus a security space for the turret. That's what I did after many painful trials. I managed to cut an ark of circle based on the turret diameter, glue it at the turret base to prevent any disgraceful gap with the fuselage. Mission done but geeee, a tricky one!
I hope this will help.
- Chris Busbridge
- Generale di Brigata Aerea
- Posts: 213
- Joined: Sat Nov 04, 2006 2:41 am
- Location: Kent, UK
- Chris Busbridge
- Generale di Brigata Aerea
- Posts: 213
- Joined: Sat Nov 04, 2006 2:41 am
- Location: Kent, UK
Yes Chris go ahead with the M, and you 'll see why the Infinity is a great tool when you 'll reach the painting session. use a well diluted paint and a low pressure and work close to the model. Enjoy!Chris Busbridge wrote:Thanks Jean! That's good to know... I have both Alphaflight kits (as payment for the boxarts and decals). Although Alphaflight are no more, I'm tempted to go ahead and build their 'M' kit, as I think it's much easier on the eye.
- Chris Busbridge
- Generale di Brigata Aerea
- Posts: 213
- Joined: Sat Nov 04, 2006 2:41 am
- Location: Kent, UK
- Luftwoller
- Comandante di Stormo
- Posts: 122
- Joined: Thu Sep 10, 2009 9:16 am
- Location: Bournemouth UK
- Kubrt
- Comandante di Stormo
- Posts: 92
- Joined: Thu Apr 12, 2007 12:44 am
- Location: Line near Pilsen, Czech Republic
To Steven Modeldad Eisenman:
I thing you have done mistake with airplane floor... Special Hobby is right:
<image currently unavailable>
What do you think about this picture? I think, the picture looks similar as the kit floor....
I thing you have done mistake with airplane floor... Special Hobby is right:
<image currently unavailable>
What do you think about this picture? I think, the picture looks similar as the kit floor....
Last edited by Kubrt on Wed Feb 17, 2010 5:23 am, edited 1 time in total.
Jakub "Kubrt" Vilingr