Spitfire Mk Vb/Trop 20 Gr.
- Mirek Riha
- Generale di Brigata Aerea
- Posts: 286
- Joined: Fri Nov 03, 2006 12:49 am
- Location: Prague, Czech Republic
Spitfire Mk Vb/Trop 20 Gr.
Hi,
there is my new model
Mirek
there is my new model
Mirek
Great finish but is not a real colorWebmaster wrote:Beautiful finish !
see this http://film.iwmcollections.org.uk/recor ... _id=137687
and this http://www.eaf51.org/Photo_03_51_ICAF_Spit.htm
Claudio
- Mirek Riha
- Generale di Brigata Aerea
- Posts: 286
- Joined: Fri Nov 03, 2006 12:49 am
- Location: Prague, Czech Republic
Hi Claudio pictures and movie in link are from 1945.veltro2 wrote:Great finish but is not a real colorWebmaster wrote:Beautiful finish !
see this http://film.iwmcollections.org.uk/recor ... _id=137687
and this http://www.eaf51.org/Photo_03_51_ICAF_Spit.htm
Claudio
According with book "Aeronautica Italiana Caccia & Assalto part III"
original paints Spitfire from RAF was Middle Stone, Dark Earth and Azure Blue (tropical scheme). This schema was repainted in Early 1945 (for standard European schema).
Mirek
- Mirek Riha
- Generale di Brigata Aerea
- Posts: 286
- Joined: Fri Nov 03, 2006 12:49 am
- Location: Prague, Czech Republic
- Dave Bayliss
- Comandante di Stormo
- Posts: 121
- Joined: Tue Jul 27, 2010 9:16 am
- Location: Worcester, United Kingdom
Great model Mirek, but a) what is the scale and b) is the 51st Stormo unit badge on the tail a decal or your own work? I am hoping to make a model of this aircraft myself using the Italeri 1/72nd kit, but although I have decals for the badge they are of the larger fuselage side size.
There's so much left to learn and no one left to fight.
- Mirek Riha
- Generale di Brigata Aerea
- Posts: 286
- Joined: Fri Nov 03, 2006 12:49 am
- Location: Prague, Czech Republic
Hi Dave,
Good choice for using the Italeri Mk Vb Trop; just please note you will have to scribe in the wing root panel line, which is strangely missing from the fuselage of the kit.
On Tauro sheet 72/552 you will find the right sized squadon badge as well as numbers to make an Italian machine. Sheet 72/550 will provide the various roundels.
Specialist retailers such as Misterkit should be able to provide both sheets.
Grtz
Peter
Good choice for using the Italeri Mk Vb Trop; just please note you will have to scribe in the wing root panel line, which is strangely missing from the fuselage of the kit.
On Tauro sheet 72/552 you will find the right sized squadon badge as well as numbers to make an Italian machine. Sheet 72/550 will provide the various roundels.
Specialist retailers such as Misterkit should be able to provide both sheets.
Grtz
Peter
- Dave Bayliss
- Comandante di Stormo
- Posts: 121
- Joined: Tue Jul 27, 2010 9:16 am
- Location: Worcester, United Kingdom
- Dave Bayliss
- Comandante di Stormo
- Posts: 121
- Joined: Tue Jul 27, 2010 9:16 am
- Location: Worcester, United Kingdom
- Vincent Fiore
- Generale di Brigata Aerea
- Posts: 246
- Joined: Thu Jun 25, 2009 2:54 pm
- Location: Morocco
- Dave Bayliss
- Comandante di Stormo
- Posts: 121
- Joined: Tue Jul 27, 2010 9:16 am
- Location: Worcester, United Kingdom
Hi all, I went to Misterkits and obtained those Tauro decals, but I must say the Skymodels decals I got at the same time are better quality for the Stormo badge. These were on the decal sheet for mc205 Veltro. So I will probably mix and match on this build. That's when I can get round to it! Of course I have to build the Veltro too and I have to finish the mc200 Saetta I am building now!
There's so much left to learn and no one left to fight.