STORMO! Forums

It's been a while but I'm back working on my PCM Re 2005, I airbrushed the undersides but forgot about the fuselage white band, normally I would airbrush the white and mask it off before commencing the main colour scheme,
So airbrushed the band on the fuselage and the rudder white, I'm going to mask the rudder cross.
But I could not find out what was the width of the fuselage band, I could guess it from the various photos and drawings but it would be nice to get it right, any ideas.
This is where I am at the moment with the model.



Cheers

Dennis

The width of the white fuselage band was 600mm or 18.5mm (1.85 cm) in 1/32 and 12.5mm (1.25cm) in 1/48.

Wow that was fast, thank you very much.

Cheers

Dennis

I thought it right that I should show you what I did with the advice that you guys have given me, so here is my completed Pacific Coast Models 1/32 scale Re. 2005 Sagitterio.
Built OOB apart from Montex masks for the national markings, paints are Xtracolor.




Cheers

Dennis

Cheers

Dennis

Beautifully done, looks accurate. Send in a article if you have a moment. Thanks for sharing.

Beautiful job, would like to see more of your work.

Absolutely gorgeous! Thank you for posting. I look forward to more of your work.

That's very kind of you, the build was a bit of a challenge but the finished model was well worth it, I have a few PCM kits in the stash and decided that I should build them so I have now built four in a row.
These were a fabric wing Mk.I Hawker Hurricane, a Hawker Tempest, and a Spitfie IX.
The other PCM kit that I built was this one:


It was built a long time ago (2010), and the once stretchy aerial wire now needs replacing.

Cheers

Dennis

Also gorgeous! My experience with my 1 PCM model was a mixed bag - great having the added detail, but getting everything to fit together was a bit of a challenge.

...Old & terrible FROG 1/72 kit built c.2012, inaccurate unit A/C number to boot ;>(



This c.2012 Aliplast G.55 was schema reprise of FROG kit I'd built c.1984:



eBay when I'd started buying Italian subject model kits in 2006 had several supposed original 1962-issue Aliplast G.55 up for sale, bought several building them during the 2010s whilst living in the folks old Cameron Park, CA house, sold it - the house - on November 19, 2015, third worst day in my life after Dad died September 6th, Mom November 2nd & before brother on August 29, 2016.

Editor wrote: ↑

Tue Jan 16, 2024 11:29 am

Beautifully done, looks accurate. Send in a article if you have a moment. Thanks for sharing.

Hi Vince sorry for the delay in answering but what form should the article take and what should I include in it, there is a detailed build thread over on LSP, do you want a shortened version ?

https://forum.largescaleplanes.com/inde ... /#comments

Cheers

Dennis

No worries, any length article will do. Provide some details or tips you think would help the next person build the same kit, paints used, any difficulties you encountered and what you did to work around them etc. Construction information is all I need.

No problem should I post it in another section of the forum.

Cheers

Dennis