Page 1 of 1

LF Flying Machine G. 50/50bis in 48th.

Posted: Wed Dec 30, 2020 10:18 am
by BobinVa
These kits have gotten scare. Please let me know if you have one or two to spare.

Thanks,

Bob Asbury

Re: LF Flying Machine G. 50/50bis in 48th.

Posted: Wed Dec 30, 2020 3:00 pm
by Editor
Hi Bob there's no LF Models 1/48 Fiat G.50, I think you're referring to the Flying Machines 1/48 Fiat G.50 and G.50bis. Below are some builds of this kit in the Stormo Gallery:

Fiat G.50 Serie II by Jean Barby

Fiat G.50bis by Jean Barby

I'd PM Jean (D520) on this site and ask if he has a spare kit or two. The old Secter kit, later rebranded by Hasegawa is a good kit too and you should be able to find one on ebay for a reasonable price.

Re: LF Flying Machine G. 50/50bis in 48th.

Posted: Thu Dec 31, 2020 11:36 am
by BobinVa
Thanks Vince,

I built the old Sector kit back in the day. If you attended the Nats in Columbus in the late 90’s, we probably chatted. As I was there with a table of EP Originals, Italian Classics and other resin goodies. I had built ups of the Italian Classics CR 42 detail set as well as the Macchi 200 and G. 50 detail set for the Secter kit.

I would love to obtain. those Classics masters and residue some of that stuff as it is still very relevant.

If you have the Ala D’Italia Breda 65 book, my RCR bios is featured in the modelers section...

Thanks again,
Bob

Re: LF Flying Machine G. 50/50bis in 48th.

Posted: Thu Dec 31, 2020 4:14 pm
by Editor
You did a great job with your RCR 1/48 Breda 65/A80. It's worth putting in our Gallery if you'd like to submit a short article. I like to think we attract the best at Stormo :)